Loading...

All Clear

Selleys All Clear is a multipurpose sealant that provides long lasting protection. All Clear is the solution to water leakage and seepage around the home.

 

Features

  • Works on wet, oily and dirty surfaces*
  • Crystal clear finish
  • Paintable
  • Mould and mildew resistant
  • Water resistant
  • Strong adhesion

Ideal For 

  • Glazing, roofs, guttering, bricks, cement, timber, windows, frames, many plastics sinks and basins.

Buy Now

All Clear
Buy Now
Categories: ,
Size 75g Tube
Colour Crystal Clear
Full Cure Time 48-72 hours
Technology Solvent Based
Use Exterior, Interior

Where can this product be used?

  • Sky lights
  • Windows frames and glazing
  • Roof and gutters
  • Sealing metal or PVC guttering and down pipes
  • Air conditioners enteries
  • Sealing metal or PVC guttering and down pipes
  • Shower screens
  • Sinks and basins
  • Sealing leaks in caravans and recreation vehicles

What materials is this product suitable for?

  • Metal
  • Timber
  • Glass
  • Glazed tiles
  • Brick
  • Stone
  • Many plastics (may damage polystyrene and polycarbonate)

How To Use

Use only in a well ventilated area. Avoid contact with skin and eyes and breathing vapours.

  1. Surface must be free from dust, loose particles and soap residue. If required, clean with turpentine. Porous surfaces must be dry.
  2. Cut cartridge, fit nozzle and cut to size. Insert the cartridge into a caulking gun such as Selleys Caulking Gun.
  3. Apply with caulking gun, forcing product into gap. Press into cracks or surface by pushing sealant ahead of nozzle.
  4. Smooth sealant surface immediately with tool dipped in turpentine.


Limitations:

  • May damage some plastics – eg. polystyrene and polycarbonate.
  • Not for permanent water immersion – eg. fish tanks.
  • Not suitable for use over silicones.
  • Not suitable for polystyrene foam.

Handy Tips

  • *Wet surfaces – can be applied to clean, wet non-porous surfaces (eg. metals, glass, glazed tiles) but not wet porous surfaces (eg. concrete, timber). Remove as much water as possible, preferably with acetone. Keep nozzle close to surface so sealant contacts surface immediately. Flatten immediately into joints. Adhesion improves on drying.
  • Skins immediately, maximum toughness achieved over several days.
  • Paintable immediately with water-based paints. For oil-based paints undercoat first with a water-based paint.
  • Store in cool dry conditions below 30°C.

Clean Up

  • Uncured product may be removed with mineral turpentine.
  • Cured product can be removed by cutting and scraping.

Data Sheet

SDS-All Clear

TDS-All Clear